From the original owner who purchased this directly from Walter Brend. Someone told me "SID" stands for "Sudden Instant Death"

Looking for an extremely rare Bayley knife for your collection? Look no further. This knife in on consignment and in mint condition

The hatchet appears unused, just handling and carbon spots. No cracks in either of the handle scales. Randall shop etched as explained in the provenance.

Up for grabs, an incredibly well made Lile First Blood Tribute knife made by Vaughn Neeley. Vaughn made this spectacular rendition of the original with a 9" CPM-154 blade with 14 sawteeth

I bought two of these off the ZT website last week and rec'd them yesterday, turned around this morning and cleaned them out of their last six.

This is a brand new Rob Bayley S4-X survival knife. (S4-X = redesigned S4) The makers signature "bayleyknife" on the upper tang, "S4-X anniversary edition #7 of 10" on the lower tang.

One of the most Iconic Survival knives in modern times. Originally a collaboration with the now famous Adventurer - TV Celebrity Bear Grylls

Brand new, this is an original Rob Bayley S4 without the serrated blade. The makers signature "bayleyknife" on the upper tang, serial #17-18 on the lower tang.

3/16" thick, differentially hardened/tempered 01 high carbon steel blade, tapered tang, blued blade finish, unpolished blk. linen Micarta handle w/std.

An unused, rare, very large "Bolo" made by Dave Beck. If the name doesn't ring a bell... this is the guy who made the original TRACKER knife that was in the 2003 movie "The Hunted"

An unused, rare, very large "Kukri" made by Dave Beck. If the name doesn't ring a bell... this is the guy who made the original TRACKER knife that was in the 2003 movie "The Hunted" starring Tommy Lee Jones and Benicio Del Toro.

Here's a neat one I've had for ages, made by ex-Randall Knives employee Will Pass.

Another rare survival knife up for grabs, this is a split saw survival knife made by Devon (Butch) Beaver. The knife is razor sharp with a sharpened clip

A vintage Morseth Fighting Knife, original sheath and custom display stand. This very collectible fighter was rehandled by James Behring, Jr. who also made the stand.

This is a razor sharp Jim Hammond hunting / skinning knife, I'm not sure of the exact model as I could not find anything similar in current or archived models on his website.

This is a custom Jim Hammond Cobra Gold, Military Version.... serial 5. This knife has a 6-1/8" blade (measured tip to micarta scales) and original top / bottom edges.

This is a custom hammer marked skinner made by James Behring, Jr. This was one knife in a matching set (both now listed), the knives did not sell as a set so I've split them up.

This is a custom hammer marked skinner made by James Behring, Jr. This was one knife in a matching set (both now listed), the knives did not sell as a set so I've split them up.

Up for grabs, a previously owned / Montana-made camp knife with beautiful amber stag handle.

This is a vintage John Nelson Cooper custom utility knife with cast aluminum handle. This knife has a 3-1/2" blade with original edge (4" from tip to handle), made from 3/16" stock with an overall length of 8-1/4".

This is a vintage John Nelson Cooper custom utility knife with cast aluminum handle. This knife has a 3-1/4" blade with original edge (3-3/4" from tip to handle), made from 3/16" stock with an overall length of 8-1/8".

A vintage Robert Parrish fishing knife with a 4.75" blade, brass guard and deer tine handle. Overall length is 10.5"

A rare stag hunter by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 3-1/8" NC6 high carbon (two tone) blade, brass guard, and a brass / leather / stag handle.

A stunning looking custom Silverfield made by Polish maker Marcin Bona. (Bona Knives) This knife has a 4-1/2" high carbon blade, silver guard, and beautiful pinned Bog Oak handle.

A beautiful "Copperfield" hunter by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4-5/8" high carbon blade, copper guard, and dyed Birch handle.

A beautiful "all purpose" knife by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4-1/2" stainless steel blade notched for thumb placement, yellow and red fiber liners

A beautiful "all purpose" knife by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4.8" stainless steel blade notched for thumb placement, red fiber liners, and olive green canvas micarta handle with nickel pins.

A beautiful "all purpose" knife by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4-1/4" stainless steel blade notched for thumb placement, yellow & red fiber liners, and olive green canvas micarta handle with nickel pins.

A beautiful hidden hunter by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4" D2 carbon blade, nickel silver & brass guard, and stabilized Maple Burl handle.

A beautiful hidden hunter by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4-5/8" D2 carbon blade, nickel silver & brass guard, and a dyed and stabilized Maple Burl handle.

A beautiful hidden hunter by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 3-3/4" D2 carbon blade, stainless steel & brass guard, and a dyed and stabilized Maple Burl handle.

A beautiful Damascus Hunter by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 4-1/2" carbon damascus blade, custom carbon & stainless guard

A beautiful Damascus Huntsman by Poland knifemaker Marcin Bona. (Bona Knives) This knife has a 6-1/4" carbon damascus blade, custom carbon & stainless guard, and beautiful Ironwood handle.

This is an unused Bill Keeler Spike Hawk with long 19-1/4" curly maple handle. Cutting edge is approximately 3-1/4", tip of spike to cutting edge measures approximately 7-3/4".

A beauty from BRT Bladeworks in Oregon. This is Ben's badass Parang with 9" 80crv2 blade, Tero Tuf scales, orange tang lines and stainless steel tubes. Made from 1/8" blade stock, razor sharp with an overall length of 13-3/4".

Brand new from BRT Bladeworks in Oregon. This is Ben's "Valkyrie" Tomahawk made from 1/4" 4140 stock. The edge is razor sharp, overall length is approx. 14-1/2".

This is a maker who's blades I do not generally carry, once in a blue moon I'll come across something like this that is just too badass to pass up. This is Swamp Rat's "Rodent Rucki" decked out with desert tan blade finish and textured sage G10 scales, the slicer of slicers if every there was one. Mint condition.

This is a custom integral made by UK maker Farid Mehr. I've had a bunch of Farid's knives for sale in the past, most notable his Lile First Blood Tribute knives. (which are outstanding!)

This is a vintage Timberline Survival Chute and original belt sheath. Serial #002SF on the back side blade flat, Timberline logo on the front.

This is a 1980's Timberline SH Survival Hunter, serial #002 . These Survival Hunters are everything you could ever want or need in a survival situation

This is a vintage Timberline Survival Companion and original belt / pouch sheath. Serial #228SC on the back side blade flat, Timberline logo on the front.

A vintage Timberline Trail Hunter and replacement Neeley SH Survival Hunter sheath. The blade is without any serial numbers -- a limited amount of these "sterile" knives were made in the very early 90's after Timberline's reorganization.

This is a brand new model C1 "Backpacker" made by Bill Sanders. Bill was one of the original 3 guys who worked at Timberline Knives way back in the 1980's, he makes a few knives now and then and his work is impeccable. This knife has a 3-1/8" blade (measures 3-5/8" from tip to black micarta scale), same as a survival backpacker but without the roughing saw.

A couple of knives up for sale that I've had hanging around way too long. The Beck has been used, the NKN appears unused. Both are really sharp, with these two in your arsenal you won't need much else.

Great for the bug out bag or ATV, toss it in your 4x4 in the event of an emergency. Everything shown is included, none of this equipment appears to have been used.

This is a neat stowaway knife made by James Piorek aka JSP Bladerigger. No signs of use on the CC sized knife, the wallet with a tad bit of back pocket / ass wear..